Creality Sonic Pad FAQ ( Frequently Asked Questions)
Q1: Severe stringing when printing? A: Check whether the relevant parameters of the slicing file match the connected printer model, such as whether to enable retraction, retraction distance, retraction speed, printing speed, and other parameters. If they do not match, you need to re-adjust the parameters and re-slicing. Q2: When resuming printing after a pause, […]
ORTUR Laser Master 3 DIY Accessories TSL Files download
Tips & Accessories Download Links Installation Tutorial Download Link Tips Download Link How to turn off the alarms Link Z Axis Spacer Download Link Base Mount Download Link Foot Download Link Tapa Rodamientos X Download Link Raiser Download Link Legs Download Link Standoff Download Link Cable Management Download Link Variable Feed System Download Link
Sculpfun S30 Series DIY Accessories STL files download
DIY accessories for Sculpfun s30 series laser engravers Accessory Names Download Links Sculpfun S30 ProLaser Feet Extender for Rotary Roller Download Link Sculpfun Laser Cable Guide Download Link Sculpfun S30 Focus Cylinder Holder Download Link Screw Improvement Kit Download Link S30 Series User Manual Download Link
FLSUN V400: A Few Tricks
Get Prints No visible lines If you print on 0.08mm layer height generally the layer lines are not visible. It’s just stock CURA super fine settings with layer height changed to 0.08 from 0.12. Generally, any line width less than the flat at the end of the nozzle will work and the loss of […]
How to get the best 3d prints with wood
To start with, what is wood Filament? All wood filaments are, as a matter of fact, made by including Wood Fiber right into a base plastic. The majority of it is typically PLA. Hence, most wood Filaments are called wood PLA and most of the low-cost variants are PLA with only around 5% of wood […]
How to Pick Your First 3D Printer?
3D printing, as an innovative technology, has the reputation of “Everything Can Be Printed”, and it is impacting our life. 3D printing, which is usually considered high technology, is not so difficult as long as you find a suitable 3D printer. Therefore, here come the instructions for novices about how to use a 3D printer. […]
Convert G-Code Back to STL
In the 3D printing process, a 3D model is normally represented in the STL format, which is converted to a sequence of instructions in GCode and then interpreted by the 3D printer. This required process is called slicing. However, what is the process of converting G-Code back to STL? Can it be done? An STL […]
6 Best 3D Modeling Softwares to Help You Create Best STL Files
Have you ever been troubled with creating an STL file for 3d printing? Especially for entry-level users, mastering 3D printing skills is really a daunting task. But creating STL files is of great importance since 3D prints cannot even be produced without an STL file and the print quality highly depends on the parameter settings […]
Join Our Community
