| Model | Ortur Laser Master 3  |
Xtool D1 Pro  |
| Laser Power | 10W (LU2-10A (9500-10500mw)) |
20W/ 10W/ 5W  |
| Engraving Area | 400*400mm |
430*390mm(20W)
430*400mm(10W) |
| Engraving Speed | 0-20000mm/min(expected to reach 30000mm/min in near future)  |
up to 400mm/s 24000mm/min |
| Spot Size | About 0.05*0.1mm |
0.08*0.10mm (20W)
0.08*0.06mm (10W) |
| Motors | 42×60 Y Stepper Motor x1 | / |
| 42×40 X Stepper Motor x1 | / | |
| Limit Switches | No limit switch required | Auto-Identify 4 Boundaries Covered by 4 Limit Switches |
| Connection | USB, SD card, Wifi, AP hotspot | Wifi USB |
| Safety Features | 7 Safety Features 1. Safety Lock (Keep the Key, Professional Use Only) 2. Active Position Protection 3. Sloping Position Protection 4. Exposure Duration Detection and Limitation 5. Voltage and Current Safety Control System 6. Host Computer Watchdog 7. Emergency Stop Switch  |
Trigger the alarm and Instant Stop Processing, if the machine detects flames or moving/tipping  |
| Control Software | Laser Explorer (Ortur APP) LightBurn LaserGRBL  |
xTool Creative Space
LightBurn |
| File Format | JPG/JPEG / PNG/ BMP/SVG/ ETC | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. |
+1
+1
+1
+1
