Stock Firmware for Ainol Novo NUMY 3G AX3 3G Phablet 169497
Computers & Tablets

Stock Firmware for Ainol Novo NUMY 3G AX3 3G Phablet 169497

Ainol Novo NUMY 3G AX3 Phablet stock firmware released!

Download the firmware

Password is geekbuying.com

Steps:

1. Run flash tool “the Flash_tool.exe”

2. Choose “Scatter”  file.

3. At this point, you need to remove the battery from your device and connect the device to a USB 2.0 port on your PC (USB 3.0 is not supported). You should start hearing the “dings” in Windows to signify that it detects your device.

4. Click the Download button on the Flash Tool.

5. If your device is connected properly, you will see the percentage bar change colors and start running. The one to watch is the yellow bar that goes from 0-100% indicating that the ROM is being flashed.

6. You will then get a window with a green circle, indicating that the flash is complete.

7. When the flashing process is done, disconnect the USB cable and replace the battery in your device and turn on the device. Your device will then boot into the newly installed ROM.

That’s it!!!!!!!!!!

 

B.regards!

GEEKBUYING

 

+1
0
+1
0
+1
0
+1
0

3 Comments

  1. Firmware does not work. incorrect format of a scatter file

  2. It is official released firmware, and we also test it. You can try again, if it still doesn’t work, we will update another firmware for you.

  3. man how am I suppose to remove the battery from the device!? It’s not user replaceable!