[ROM Download] New Android 4.2 stock firmware for MK809III TV Stick with Rockchip RK3188-T and AP6210 wifi/bluetooth module

It’s firmware update times, i have posted a lot of new stock firmware recently, hope you guys enjoy.

This firmware is for MK809III, or it should suit for all of the same specification tv boxes, it is for device which have Rockchip RK3188-T and use AP6210 wifi/bluetooth module, should like CX-919 or MK802IV etc. ok, here we go.

firmware download link is here

http://www.mediafire.com/download/7gul37v4pdfudll/MK809III__update_dongle_RK3188T_6210_3.1.rar

How to update the firmware?

you may need the flash tool here

http://www.mediafire.com/download/cmj5b4222p7cbm7/RKBatchTool_v1.7.rar

if you have problem to install the drivers on your pc, you can try this instruction

https://blog.geekbuying.com/index.php/2013/11/08/have-problem-in-install-the-rockchip-drivers-no-worry-rockchip-release-the-drivers-auto-installation-tool-download-here/#.Uxpy4fnu-hU

Eric

Mar 8, 2014Geekbuying Blog

9 years ago MK809IIImk809iii STOCK FIRMWARE20,543

Geekbuying Blog

Comments: 7

potard

9 years ago

Is it 1080p or 720p firmware ?

Eric

9 years ago

Still 720p firmware. but we are working with our developer, and will release the 1080p kernel soon.

CXL

9 years ago

I've bought this stick , but when i connect to the TV , no signal is detected. The red led is on but nothing happens. I have tried every HDMI port , but did not worked. Out of the box.

Mike

9 years ago

I turned off device and can not find how to turn it back on. Any help?

Hammaskeju

9 years ago

Any estimation for the 1080p supported firmware???
How to get smooth playback on preinstalled XBMC?
The video runs on time, lipsync is ok. But somehow it doesn't look so smooth. For example with Rasperry Pi the video plays always smooth wth hardware decoding.

Ivan

9 years ago

My device has the following symptoms:
Went black screen after disconnecting
Try to flash the software from this website but no luck. (I installed the drivers for win7 and got the computer to see the device but whenever I try to upgrade or restore the firmware gives me the following message highlighted in red; LAYER 4-2 DOWNLOAD BOOT FAIL. Is this device broken? Can I do anything to repair it? Any help?