Download link: IPEGTOP Z26
1.before you flash the phone you need to install the drivers on your pc.
2. Make sure Z26 is without Battery when flashing
1:Open flash tool SP_MDT_exe_v3.13
2: Choose the right file as the below:
3: Change the USB port to “Preloader →DA”, and choose no battery, Click “start all”
4: Remove the battery off your Z26 and Connect Z26 with your pc using the cable
5:The only thing you can do is waiting now. It should take 3-5mins. It will show 100% at last.
Below is the “about the phone” after flash this ROM
Note: make sure you have install the driver of mtk6589 phone on your pc before you flash it.