Hello everyone! Cube released the latest Android 4.2 beta upgrade firmware for U30GT2. And it mainly to improve the functions below.
1. Optimized the battery detect error problem;
2. Modified manually set the built-in wallpaper not clear problem;
3. Improved the ROM hardware compatibility;
4. Optimized online videos, play more smoothly;
5. Optimized the overall system operation fluency, and enhance the user experience.
Click to shop Cube U30GT2
Password is geekbuying.com
How to upgrade Cube U30GT2 to Android 4.2? Look here, just need to step-by-step follow the instructions.
2. Unzip the firmware and install the upgrade tool.
3. Open , and will pop up the following interface:
3. As shown in the figure below, to upgrade the firmware has been automatically selected, directly next upgrade driver installation.
4. Install driver.
5. Shut down U30GT2, and then long press the volume+ button and Turn on/off button at the same time, connect the U30GT1 with computer.
6. Click the “fix” will appear the following interface:
If you download the firmware steps to complete but the calibration firmware error, you can enter the upgrade mode to re-click the “fix” Brush; or you can unplug the cable, press the power button after 10 seconds and then release, then press the power button for 3 seconds. The normal boot can be used(Frist brush need to wait 2-3 minutes after upgrade, so that the completion of the Android system initialization)