Hi guys:

NEO G4 mini pc get the 1080P upgrade, here is the firmware download link:

https://www.dropbox.com/s/nzxdcb0a533ys0q/G4_dongle_4.1.1_201310117_1080.zip

password:geekbuying.com

1 Download the firmware from above link,and decompress it to one folder; you will get the the following file:

” rkbatchflash tool” it is the tool for you flash your neo g4;

“usb driver” it has the neo g4 driver for different windows operation system; ( if you are using the newest windows 8, you can get the driver here: https://www.dropbox.com/s/flyz58dxxujrc1v/Rockusb-win8.rar

also you will get the firmware file,format is .img;

2 Get your Neo G4, and find the “recovery” button here:

find a paper clip and then press the recover button, you can feel it when you insert to that hole.

3 Press the recover button, and then at the same time, connect the NEO G4 with your PC via OTG cable;

4 Your PC will find a new device, and inform you to install the driver, then you can go to “Device Manager” and find the unkown device, install the driver from the folder you just download;

5 Open the “RKBatchtool” the flash tool, if you have installed the driver correctly, you will see a green button, if not, you will see a pink button,then try to install driver again;

6 Choose the firmware you just download, and click Restore button.

Please do not interrupt the power supply when you do the upgrade!

At last, we find a video instruction to show you how to do the correct update,please check here: