Hi guys:
We just get the lastest firmware update for MINIX NEO X5. this firmware can upgrade your NEO X5 from Android 4.0 to Android 4.1, and it add the real 1080p output.
Here is the firmware download link:
http://www.sendspace.com/file/cisp01
and here is the firmware update instruction:
1.- Firmware Download and unzip
2.- Turns the X5 and closes the unattached USB cable to the OTG port or PC to
3.- On the X5 on the back there is a small button called “RECOVER”. This button, press down gently by paper clip, you can feel a distinct resistance
4.- Switch on while holding the RECOVER button to release X5 and after about 5 to 7 seconds
5.- Windows will now try to install the driver, but it will fail. In the Device Manager is where you will be shown an unknown device. Then installs the appropriate drivers from the “Driver” folder manually (depending on which operating system or 32/64 bit version)
6.- Now Opens RKBatchTool. It should now appear below a pink or green button. If it is pink, you have to perform steps 2-4 again
7.-If the dot is green, the tool has detected the X5. Goes above the upper right on the button with the three dots and select the appropriate. Img file from the firmware folder from
8.- Then you press down the button restore. The upgrade is now done. At the end of a message is that the upgrade was successful / successful
9.- The X5 should then launch in a new, what will take a while. Stop in time in any case the power supply! Done!
We will flash this new firmware, and put the new screenshot as soon as possible.
Shopping link:
Great !