Whether you are a beginner or an experienced user of Wanbo TT, it is important to be familiar with its operations. In this blog, we will provide a comprehensive guide on how to use this projetor safely and effectively.
1. What’s TT’s physical resolution?
The physical resolution is 1920*1080, the standard 1080P
2. Does TT uses Netflix to play videos?
TT supports Netflix online 1080P playback, and the device supports the highest encryption level Widevine DRM L1.
3. What are the built-in APPs?
Only the built-in Netflix, YouTube, and Primevideo three mainstream apps, other apps are built-in for the APP store, and can not download third-party apps.
Disney+ and HBO are not supported, only apps in the app store are supported, and apps are not supported for uninstalling.
4. Why the far end of the side throw will be unclear?
The machine placement side projection blur is actually caused by the basic principle of the projector: keystone correction only corrects the projected picture, and the brightness of the overall projection of the light machine will still be affected by the distance, the near end of the projected picture will be clearer than the far end of the projected picture, as long as it is a side projection, the picture quality will be lost. Limited by the machine principle as long as it is a projector has this phenomenon, the closer to the front projection, the closer the far end of the picture will be to the near end of the picture quality, which is a normal phenomenon.
5. How about the side projection angle?
The maximum angle of left and right correction is 30 degrees, and the recommended best angle is within 18 degrees, and the angle will affect the clarity of the projection. The vertical correction angle of the machine is up to 45 degrees, and the recommended is within 25 degrees.
6. Whether TT supports keystone calibration?
TT supports automatic keystone calibration up and down, and also supports side projection. Side projection needs to find the four-point trapezoid in the keystone calibration of the machine settings for manual adjustment.
7. TT will raise the pop-up window with an excessive angle.
When the upper and lower automatic keystone calibration is too large, a pop-up window will be prompted.
8. Does TT support autofocus?
The TT supports autofocus, and manual focus using the remote control is also supported.
9. How to connect to a local area network (such as a network that requires device authentication)?
After the machine is connected to WiFi, you need to enter the browser, enter the LAN URL in the browser to log in, and authenticate the device.
10. Can I change the color temperature (image mode)?
The image mode can be seen in the machine settings, where changes can be made as well as custom changes
11. Is it supported to change the sound effects?
The sound effect mode can be adjusted in the settings, and you can also customize the changes.
12. TT does not support downloading other apps.
TT does not support downloading apps, and can only use built-in Netflix, Youtube, prime video online mainstream apps.
13. Is WIdevivnD_x005f RM L1 supported?
Yes, you can play movies in Netflix 1080P resolution
14. Whether Dolby Audio is supported?
TT supports Dolby Audio, can play format sources with Dolby Audio, such as AC3, TDS…
15. What is the frame rate of TT?
The TT frame rate is 60fps.
16. Does TT support connecting game consoles?
TT has a wealth of interfaces, HDMI interface supports connecting external game consoles, such as Switch, PS4, PS5 and other mainstream game consoles, but also supports connecting TV sticks, TV boxes and other external devices.
17. How to share the same screen (Android only)?
The mobile phone and the projector are connected to the same frequency band of WiFi, after connecting, open the home page of the machine four-grid icon, open Screencast, click the same screen switch on the mobile phone after entering, and click connect after searching for the device, you can be on the same screen.
Airplay protocol is not supported for mirroring the same screen, but DLNA protocol is supported, that is, TV screen projection, Miracast, and HDMI is also supported for the same screen.
18. How to cast the screen?
The mobile phone and the projector are connected to WiFi in the same frequency band, after connecting, open the home page of the machine four-grid icon, open HomeShare, click the screen projection icon of the mobile phone application, and click Connect after searching for the device to cast the screen.
19. How to use the computer for the same screen?
Use HDMI cable, connect the computer and the projector, the projector opens the signal icon on the home page, click the HDMI icon, you can play the same screen.
If there is no screen after connecting to the computer, you need to press the Windows key + P key on the keyboard on the computer and select Copy.
20. How to set HDMI picture?
The computer uses HDMI to connect the projector, you need to turn on the PC switch in the HDMI settings, and the computer output screen resolution is recommended to be 1920*1080p 60fps.
21. How to deliver PPT?
You need to use the computer to connect the projector with HDMI, and project the PPT through the same screen of the computer.
22. What’s the projection distance?
It is recommended to project at a distance of 1.6m to 2.6m, and the screen size can be adjusted by moving the machine position according to your own preferences.
23. How to enlarge the picture?
The lens of the projector is fixed-focus, and magnifying the picture requires moving the position of the projector to enlarge the picture. (The closer the smaller, the farther the larger, the principle of the projector).
24. How to zoom out of the picture?
Click the machine home page settings, find the zoom after entering, you can zoom out of the screen (the screen reduction is limited, and the screen can only be zoomed within the corresponding limit).
25. What’s the machine’s resoluion?
TT has a real physical resolution of 1920*1080P, and can support decoding up to 4K resolution video.
26. What’s the Bluetooth version?
TT’s Bluetooth is 5.1. Support connection Bluetooth speaker, Bluetooth headset, support playback of Dolby Digital audio.
The projector does not support Bluetooth connection with the mobile phone.
27. How about the speakers?
TT’s speakers are two 5W high-quality speakers, and the machine supports decoding and playing Dolby Digital audio and other sound effects.
28. How about the light source life?
TT uses LED light source, and the lamp life is about 30,000 hours, so the machine bulb life does not have to worry.
29. Does TT support connecting WiFi?
TT supports connecting to WiFi networks, also supports connecting mobile phone hotspots, and supports 2.4G+5G dual band.
30. OTA upgrades?
TT supports online OTA upgrade, and the version will be maintained and updated continuously.
You can also support the firmware package U disk for upgrade.
31. How to play videos or pictures from a USB flash drive?
After the machine is connected to the U disk, the signal source on the home page is opened, there is a USB entry option, and after clicking in, you can open and play the videos and pictures in the U disk inside.
32. How to use the remote control?
TT’s remote control is an infrared remote control, which can be directly used to turn on the signal source, mute and other operations with one key.
33. How to select the languages?
Home page settings – settings – the first line is the language, after opening it you can enter to change the system language.
34. How to reset?
Home Page Settings – Settings. After entering, the bottom is the factory reset entry.
35. PS4, PS5, Switch lag, and computer HDMI connection delay.
PS4,5 modify the output screen resolution and frame rate, and open the image settings of the machine to change the picture mode to save energy, the computer is also modifying the image and reducing the resolution.
36. The computer is connected to the HD cable to display the HD no signal.
The HDMI interface cable is not connected properly, and the HDMI HD cable of the computer and the projector can be reconnected or exchanged at both ends to solve it. Or change the line again.
37. Screen casting is not possible.
Need to determine the network frequency band, mobile phone and projector is the same band under the WiFi network, after determining, open the machine home page four-square grid icon, after entering can be the same screen or screen projection according to the prompts inside.
If you can’t find it, you can directly open the hotspot to the projector on the mobile phone to connect, and then perform the same screen or screen projection operation after connecting.
The mobile phone hotspot can cast the screen to the projector, while the router WiFi can not cast the screen or the same screen, after determining the frequency band, turn off the router for 10S and restart it before connecting to the screen projection.
38. Switch Projection has no picture.
It is recommended to change an HDMI cable to connect, you can restart the machine and connect again.
Check that the base of the Switch is installed and the HDMI cable is plugged in.
39. The computer HDMI projection is unclear.
Check the computer output resolution, if it exceeds 1080P you need to change to 1080p, the output frame rate is 60 frames.
40. WIN+P selects the second screen.
In the NVIDIA Control Panel, select Displays to set up multiple monitors.
41. The computer projects the screen The computer has sound, and the projector has no sound.
Switch the audio output of the computer (click the speaker in the lower right corner of the computer to select the device switch) to change an HDMI cable.
42. There is no sound after the message comes from the casting process.
See if the customer has also turned on Bluetooth on the mobile phone and needs to turn off Bluetooth.
43. TT uses HDMI to project the screen is incomplete.
In the machine settings, after turning on the PC switch, the screen will be displayed normally.
44. Mac HDMI shares the screen.
When the MAC computer is connected to an external monitor for the first time, there will be no screen, you need to set up the computer, enter the monitor settings, select the mirror display in the setting prompt box, and you can display it on the same screen.