News

A Tutorial of GameSir G7 Game Controller

Written by Cecily on January 28, 2023

How to Connect
Volume Control
It’s for adjusting your headset’s volume. You need to plug in your headset for volume control.
A. Hold the M button + D-pad’s Up/Down to Increase/Decrease the Master Volume. (10 levels in total)
There will be a beep when adjusting to the maximum/minimum level.

B. Hold the M button + D-pad’s Left/Right to Increase game volume while Decreasing voice chat volume/Decrease game volume while Increasing voice chat volume.
There will be a beep when adjusting to the maximum/middle/minimum level.

C. Microphone Mute Function: Tap the Microphone Mute button, and the indicator will become solid red, and the Microphone Mute function is On. Tap again the Microphone Mute button, the indicator will go out and the Microphone Mute function is Off (Default).
Back Buttons Settings

A. Set M1/M2 button value: Hold the M+M1/M2 buttons simultaneously for 3s. When the indicator blinks slowly, tap the button you want to map to M1/M2. The indicator turns solid to indicate M1/M2 button value is set.
B. Cancel M1/M2 button value: Hold the M+M1/M2 buttons simultaneously for 3s. When the indicator blinks slowly, tap M1/M2 button. The indicator turns solid to indicate M1/M2 button value is canceled.
Joysticks & Triggers Calibration
A. Hold the View + Menu + Xbox buttons until the USB-C cable is inserted into the PC’s USB port. The indicator will slowly blink white.
B. Cancel M1/M2 button value: Hold the M+M1/M2 buttons simultaneously for 3s. When the indicator blinks slowly, tap M1/M2 button. The indicator turns solid to indicate M1/M2 button value is canceled.
C. Press LT & RT to their maximum travel. Rotate the joysticks at their maximum angles 3 times. Press the A button. The indicator becomes solid white to indicate the calibration is over.
D. After the calibration is over, it’s required to unplug and re-plug the controller before using it.
Customization Via “GameSir Nexus” Software
Download “GameSir Nexus” software at Microsoft Store on Xbox/PC
Use the “GameSir Nexus” software to upgrade firmware and create 3 custom profiles. The profile includes button mapping, joystick & trigger zone adjustment, vibration level control, etc.
If the M1/M2 button value set in the software is different from the manual setting, the latest setting shall prevail, and the former will be directly overwritten.