Beelink GT1 Mini Android TV 8.1 SCV3
Changelog SCV3:
- Updated to 115N0 ( not much difference from 114N0 )
- Added back white settings, because of looks like some like it….
- Updated all Google stuff.
- Updated setup, you guys can enable “Ok Google” now on it, it also can be enabled/disabled it in settings (google icon)!
- Updated Launcher with Playstore and App drawer already in favorites ( Main Screen )
- A try to disable for good HDMI CEC since is not working ok, to see if it fixes the problems that some have with it! (tell me how it works…)
- Enabled Amlogic H264 2k / 4k HW playback ( ye it was disabled… )
- Removed Vudu and Cbs…
- Leaved RedBull TV but made it uninstallable.
- A few other minor tweaks.
Bugs SCV3:
- Same as SCV2…
Changelog SCV2:
- Updated to 114N0
- Added TWRP 3.2.3 (See bugs section)
- Changed default Webview from AOSP to Google Webview
- Removed Root, if you want root back just flash the latest Magisk, use “Backup&Restore” app.
- Removed sideloadlauncher and added App Drawer
- Removed Chrome and added PuffinTV_Browser ( Only on Clean installs or Factory Reset )
- Cleaned some stuff.
- Did OTA zip, this zip can be used to flash over the stock one but DONT FORGET TO TICK BOTH WIPE in “Backup&Restore” app.
- The OTA zip can also be used to update from SCV1 to SCV2 without losing your stuff, so it means no need to tick wipe in “Backup&Restore” app.
Bugs SCV2:
- USB2 Port in TWRP do not work, use USB3 port. or sdcard..
- CEC don’t work, and i don’t think it ever will in this 1? how revision…
- Don’t use internal video players to play video files… Use Kodi 18… or others…
- Some more i know and others i bet i don’t know!
Changelog SCV1:
- Based 112N0
- As close to default Oreo Android TV as possible
- White settings striped so don’t look for it…
- Fixed a few stuff… already reported to beelink…
Bugs SCV1:
- CEC don’t work.
- Don’t use internal video players to play video files… Use Kodi 18… or others…
- Some more i know and others i bet i don’t know!
Download:
Install instructions:
- Use USB Burning tool 2.1.6.8 DONT USE OLDER ONES….
- These boxes are very picky when it comes to flashing, so use a quality usb cable.
- Also connect the power supply when you are flashing.
- Normally on my box the first 2 flashes go bad… dont worry the box wont brick because of it, it wont boot until you flash it fully but it always enters in flash mode…
- Just try and try and try until you get a good flash.
- I recommend you guys press start in the flash tool and then connect the box…
Credit: FreakTab
+1
+1
+1
+1
1
