Note: the new AOSENMA CG035 comes with 1080P FHD spherical camera.
The Aosenma CG035 is the latest product of the Aosenma Company. It has two versions. The basic version (without camera) and FPV version. It has a control range of about 300-500 meters from its 2.4 GHz controller and its 7.4 V 2,600 mAh battery can help it stay in the air for up to 20 minutes. Now, let’s unbox the Aosenma CG035 FPV version.
Main features
-GPS/GLONASS Dual System
-1080P FHD Camera
-Altitude Hold Mode
-GPS Follow Me Mode
-One Key Take-off & Landing
-Surrounded Flight
-Headless Mode
-Object Round Flight
Front View
The Aosenma CG035 looks exactly like MJX X101. On the front of the drone, there are two large blue LEDs, which look like eyes. The shell, propellers and landing gear are made of durable plastic, which is sturdy enough to survive crashes.
Side view
At the left side of the drone, there is a micro USB port.
Rear view
At the back side of the drone, there is battery bay.
Upper view
Bottom view
Motor
It adopts four independent motor drivers, which can make it fly more smoothly and easily finish all kinds of flight movements.
EMAX PM1806 Brushless Motor
Battery
The drone is powered by 2S 7.4V 2600mAh Lipo battery. This gives about roughly 20 minutes of flying time. The charging time is approximately 65 minutes.
Battery weight: 115.7g
Battery dimension: 109.61 X 33.87 X 14.16mm
Battery with protective shell weight: 130.9g
The LiPo is a standard model with t-dean and balance plug.
USB Charger
Input: DCSV 1-2A
Output: DC 7.4V 2*600mA
Propeller
Four propellers weight: 16.7g
Propeller thickness: 6.09 mm
Propeller guards
The prop guards are made of nylon engineering plastics which have a strong flexibility, heat resistance, corrosion resistance, and a low friction coefficient, so its flight performance and safety performance are higher.
Camera module
The built in 1800P HD camera allows users capturing aerial videos as well as still photos. With FPV capabilities, you can see everything that the drone can see in real time.
On the right side of the camera module, there are micro SD slot, a tiny power switch and a mini JST connector.
A linear 5.8G antenna is optimizing the transmission more for vertical distances.
Before screw the gimbal mount, you need to connect the 3 servo plugs. Each plugged is clearly labeled.
The plug 1 controls the camera. The plugs 2 & 3 control the tilt and pan respectively.
Weight: 46.6g
Landing gear
The landing gear weighs 17.7g, which is durable and flexible
Transmitter
The transmitter looks like DJI phantom transmitter. It features 2.4GHz radio control, high sensitive operation, about 300m long control distance and strong anti-interference ability.
4 x 1.5V AA battery are required (not included)
FPV monitor
The transmitter has a basic 4.3inches LCD screen that allow users to view video playback.
Monitor Resolution: 800*480
Brightness: 450cd/m2
Screen contrast: 500:1
Viewing angle: 140/120 degree (Level/vertical)
Led lights
The drone is equipped with green and red LED lights on the front and green lights on the rear arms. Those cool LEDs not only provides outstanding visibility during recreational night flights, but also make your night flights much more beautiful.
Package contents
1 x Aosenma CG035 RC Quadcopter(With GPS)
1 x Transmitter
1 x 2D Gimbal
1 x 1080P HD Camera
1 x 4.3Inch Monitor
1 x Support frame
1 x 7.4V 2600mAh Lipo Battery
4 x Propeller
1 x USB Charger
1 x English Manual
The Aosenma CG035 is an incredible quadcopter which is not only well built but also offers abundant features such as altitude hold, follow me, one key take off & landing etc.