Hi, here is the firmware fo UMI IRON.
Download here : UMI IRON Android 5.1 MTK6753 Smartphone Firmware
Flash Tool install manual
Install ROM with the Flash Tool (We do not recommend this method Only for Advanced Users):
Drivers:
First of all,be sure you have correct drivers installed:
Install http://pdanet.co/a/ and VCOM https://drive.google.com/file/d/0BwI-z-jARlQZVjlMQTAwX1JFNG8/edit?pli=1
First of all,be sure you have correct drivers installed:
Install http://pdanet.co/a/ and VCOM https://drive.google.com/file/d/0BwI-z-jARlQZVjlMQTAwX1JFNG8/edit?pli=1
If you are in Windows 8 you need to manually install the mt6592 vcom drivers!
More info here:
More info here:
After you install all the drivers, connect your phone powered ON and activate USB debugging. USB debugging is activated from Developers options in settings menu. To activate Developers menu, you have to go to Settings > Phone information and click on “Compilation number” until a message showing that developers menu is activating, will appear (for some ROM`s there could be a different way to activate developers menu). Head back to Setting, Developer options will appear in the menu. You can activate USB debugging there.
Connecting the phone to the computer will install the drivers needed – automatically.
<strong>Software:</strong>
We will use SP Flash Tool V5.13.52<, you can check web for a newer version (Don`t use older versions to prevent damage to you phone).
You can download SP Flash Tool V5.13.52 here: http://goo.gl/wvNnTn
We will use SP Flash Tool V5.13.52<, you can check web for a newer version (Don`t use older versions to prevent damage to you phone).
You can download SP Flash Tool V5.13.52 here: http://goo.gl/wvNnTn
ROM installation:
1. Unzip ROM file on your computer.
2. Executing SP Flash Tool:
3. Click on the «scatter-loading» button:
4. Choose the folder were you have unzipped your ROM.
5. Choose the right file.
6. CAUTION: We have to disable first parameter – «PRELOADER»
Now you are prepared to flash your phone.
7. Check if your phone is charged and USB debugging is ON. Then turn off your phone.
8. Click on Download button in SP Flash Tool window.
9. Then connect your phone to your PC via USB cable WHILE YOU HOLD VOL DOWN!
If everything was done correctly, the process will start and a red progress bar will appear.
2. Executing SP Flash Tool:
3. Click on the «scatter-loading» button:
4. Choose the folder were you have unzipped your ROM.
5. Choose the right file.
6. CAUTION: We have to disable first parameter – «PRELOADER»
Now you are prepared to flash your phone.
7. Check if your phone is charged and USB debugging is ON. Then turn off your phone.
8. Click on Download button in SP Flash Tool window.
9. Then connect your phone to your PC via USB cable WHILE YOU HOLD VOL DOWN!
If everything was done correctly, the process will start and a red progress bar will appear.
If on this step you will see the following error «PMT changed for the ROM, it must be downloaded …» you have to change option «Download only» with «Firmware Upgrade» and repeat the same steps again.
Installation will continue in the next window, where you will see a yellow progress bar.
Flash finished congratulation!
You can now safely disconnect your phone.
You can now safely disconnect your phone.
One more thing you need to do is to clear cache and data, to have a clear installation.
1. Hold down VOL down and Power button,
2. 2 second after the ZERO logo appears let go of the buttons!
3. You should now be in the Recovery (you see a green Droid laying down)
4. Press the Power button once, and the Recovery menu should appear
5. Use VOL down button to go down the menu to “wipe cache partition”, and press VOL UP to confirm
6. After that, go down to «Wipe Data\Factory Reset», and press VOL UP again. (You will now delete everything on the phone!)
7. Go back; go to «reboot system now» and press VOL UP again, done!
2. 2 second after the ZERO logo appears let go of the buttons!
3. You should now be in the Recovery (you see a green Droid laying down)
4. Press the Power button once, and the Recovery menu should appear
5. Use VOL down button to go down the menu to “wipe cache partition”, and press VOL UP to confirm
6. After that, go down to «Wipe Data\Factory Reset», and press VOL UP again. (You will now delete everything on the phone!)
7. Go back; go to «reboot system now» and press VOL UP again, done!
After reboot device, we will have a totally cleared ROM installed.
+1
+1
+1
+1
