1. Unpacked the file
2. Open Folder below
3. Choose firmware update tool
4. Choose something what above picture show
5. Choose the Eleventh Options.
Choose Third Options, then check “ok”
6. Check “Scatter/Config File”，then choose firmware update file
7. Already choose update file, thencheck “Download”.
8. After check “download”, connect G2 with computer, but make sure G2 is power off.
9. Here, if not first time connect, you can waiting, until success, go to step 13. If it is first time update firmware, computer will notice you instill the drive, like before.
10. Choose “Install from a listor specific location” , then check “next”.
11. Select “Browse” and find the corresponding G2 driver. And click “Next”
Check “Finish” drive instill success.
12. REPEAT STEP 3-8. THEN GO TO STEP 13
13. In the process of update.
Finish update and take out your watch.
Product reference link:
