Few days ago, we noticed an article about how to flash CyanogenMod 11.0 on Doogee Titans2 DG700. As the CM 11 is not steady right now, you may come across some minor bugs. But good to know, it will keep updating all the time until it’s totally bug-less.

Excited? Following are the details of flash procedures:

STEP1: (Ignore this step if you are already on kitkat stock ROM )

• Flash Kitkat stock ROM.
• Please make sure your stock ROM’s path doesn’t have any space or the name is too long.
• Open SP Flash tool and Load the scatter file MT6582_Android_Scatter.txt
• Change Download Only to Firmware Upgrade.
• Click on Download button and connect your phone.

STEP2: (this step involves flashing of recovery_dg700.img )

• Power off your phone.
• Open SP Flash tools and load the Kitkat stock ROM’s MT6582_Android_Scatter.txt
• Now unselect all the options and select only RECOVERY.
• Change the Location of RECOVERY to where recovery_dg700.img is located.
• Click on Download button and connect your phone.
• Wait for the download to complete 100%. You will get an error, just ignore it and disconnect your phone.

STEP3:

• Power on your phone and copy the ROM (cm11-dg700-ALPHA1.zip) to your internal SD card.

STEP4:

• Power off your phone.
• Press and hold VOLUME UP + POWER button until you get a screen with three options.
• Use VOLUME UP to select recovery and then press VOLUME DOWN to boot into recovery.
• Now your phone will boot into recovery mode.

STEP5:

• Now in the recovery mode use VOLUME UP and DOWN to Navigate and POWER button for OK.
• Select Wipe and Format Options -> Clean to Install a New ROM.
• Wait for the procedure to complete.
• After it’s done, use the Smart Key to back to main menu.
• In the main screen, select Install Zip -> Choose zip from /storage/sdcard0 and then select the copied ROM zip file.
• Then the ROM will install and after you are done, click on Reboot system now on the main recovery screen. It will boot into CM11 now!

More details of DOOGEE DG700 from GeekBuying.