Chuwi V17HD with a rk3188 quad core A9 architecture processor, and equipped with the latest android 4.4 kitkat OS. It packs a 7 inch IPS display with a 1024*600 pixel resolution.
It has 2 version: 512MB RAM + 8G ROM, 1GB RAM + 8GB ROM. Maybe some guys think 512MB RAM is too low, so the factory re-introduced a 1GB RAM one from the consumer’s point of view.
About the stock firmware, 512MB version firmware is the same with the 1GB one.
The firmware is the latest one:
Download the firmware from here
http://www.mediafire.com/download/2xhmje3se2e2cok/V17HD_140330.zip
Password is geekbuying.com
How to upgrade V17HD? Follow us:
Steps:
1. Running the upgrade tool
2. Select the firmware
3. Power on your V17HD and then connect the tablet to the computer.
4. The first box will turn to pink, then click switch, it will remind you install the driver. When the driver installation, the first box will turn to green.
5. Click upgrade
6. The upgrade is complete the MID automatically turned on, you can unplug the USB cable.
B.regards!
GeekBuying
I have flashed the new firmware but can you please post a root method for the V17HD.
Thanks.
Thanks for your attention, again.
I did all the steps above, but my Windows 7 64 bit PC computer didn’t recognize the Chuwi V17HD device.
Can you give us the driver?
Thank you in advance.
Regards,
Hello
i have followed the process and all passed with no problems only at the end my tablet is bricked
after all was done with o errors by what the program said, the tablet started but instead of graphics there was just bits a pixeles moving about and that is it.
tablet is bricked
Same here. Fck that!
I also have this bad firmware. do it here:
http://www.arctablet.com/blog/forum/crewrktablets-rk3188-entwicklung-customroms-development-croms/rom-chuwi-v17hd-3rd-generation-android-4-4-2-kitkat-custom-root-firmware-20141223/
hello, my tablet is too bricker with this firmware. I’m in! Warranty. he must return my tablet?
thank you to answer me geekbuying