Upgrade Guide of Ployer MOMO 11 Speed
This blog is about update instructions of Ployer MOMO11 Speed.
First, download the update ROM pack.
Connect to device
Power on your Ployer MOMO11 Speed, connect the USB cable to your PC.
Open the upgrade tool, RKBatchTool.exe
Unselect the USB debugging mode in the system settings, the cube “1″ will turn to pink, Then choose the firmware.
Browse and select the firmware.
Click “切换”, then the Windows will find the new hardware. Tips below will come out if you have never installed device driver.
Select “Install from the list or specific location(senior )(S )”
Select “rockusb.sys”under the driver progress file.
Then the driver installation of the USB device has been done.
At this time the cube “1″ turns to green.
Click “升级” and wait it will be done automatically.