Here is the English user manual of Lenovo Watch 9.
Press and hold the button for 3 seconds, the 12 o’clock light flashes quickly, Powered on and the Bluetooth is turned on.
2. Turn on Bluetooth
Press and hold the button for 3 seconds to turn on the Bluetooth, and the 12 o’clock light flashes continuously.
3. Connect Bluetooth
Go to the APP Bluetooth search interface and click on the Bluetooth name to connect. During the connection, the watch will vibrate. At this time, press the button or shake the watch to confirm the connection, and the APP will redirect to the function page.
4. Turn off Bluetooth
Press and hold the button for 3 seconds to turn off the Bluetooth and the 12 o’clock light flashes once.
5. View Bluetooth
Short press the button, if the 12 o’clock light flashes continuously, the Bluetooth is not connected; if the 12 o’clock light flashes 2 seconds, the Bluetooth is connected; if the 12 o’clock light flashes once, the Bluetooth is turned off.
6. Find Your Phone
Press the button twice in a short time (the interval is 0.5-10 seconds), the watch will vibrate once, and the function of finding the phone will be turned on. And the phone will ring.
7. Factory Data Reset
Press and hold the button for 6 seconds to enter the power off state and reset the factory data.
8. Call Reminder
Please turn on call reminder function in the APP before use, and allow APP reminder permission in the mobile phone system. When the phone comes, the watch vibrates. Short press the button or shake the watch to hang up the phone.
9. Sedentary Reminder
Turn on the app before use to set the sedentary reminder function. When the sedentary reminder time is up, the watch will vibrate.
10. Application Message Reminder
Turn on the APP message reminder before use, and allow APP reminder permission in the mobile phone system. When the message comes, the watch will vibrate.
11. Alarm Reminder
Turn on the APP to set the alarm before use, the alarm setting will be automatically saved to the watch, and the watch will vibrate at the time.
12. Sports Steps
The watch automatically monitors the steps, presses the button once, and the second hand will indicates the current movement completion.
Description: Set the sports goal in the app before use.
13. Remote Capture
Enter the APP photo interface, short button or shake watch to control the phone to take photos.
14. Sleep Monitoring
The watch automatically monitors sleep and views sleep data on the APP.
15. Intelligent Calibration
When the APP enters calibration interface, the watch will stop walking, then enter the stop position of the watch pointer in the APP. When the calibration is started, the watch pointer will be sync the time of the mobile phone system.
When the watch firmware has a new version update, it will automatically notice when you enter the APP. After clicking the update, it will be automatically upgraded.
Note: Due to the different mobile phone may cause differences. There will be a low probability of upgrade failure. After the upgrade fails, you can try the upgrade again.
17. Replace the Battery
Use professional tools to open the back cover of the watch, remove the old battery, and put the new battery into the battery slot. Click the back reset button to reset the factory data. Boot to confirm that the battery is in place, then use the professional tools to close the cover and start use the watch.
Note: It is recommended to replace the battery in the professional repair shop, the battery model is CR2032.
18. Low Battery Reminder
After entering the low battery state, the watch will automatically turn off the Bluetooth and smart functions, only walking the watch and need to change the battery.
Note: At this time, press and hold the button for 3 seconds, it will flash once, and Bluetooth will not be turned on.