Today we will share Onda V971 firmware with you. And will release three versions, so you have to know the version of your tablet. Check the version number, see the back of the tablet 9,10 bit SN code.
Password is geekbuying.com
1. new boot logo
2. new desktop systems of Onda
3. Underlying SDK upgrades, system stability and compatibility enhancements
4. Miracast function optimization
5. Increase multi-language
6. Fixes for known software problems
7. Increase internal disk capacity display in “Setting – Storage”
Brush has risks, please read the tutorial carefully, and then operation!!!
1、Please use Win XP, Win7 desktop computer, and then USB cable is connected to the rear USB port on the desktop computer.
2、Ensure that the power of the Tablet PC in more than 50%.
3、Please turn off anti-virus software on your computer.
4、Prepare for the firmware.
1. Extract the firmware to the desktop.
Run the upgrade tool and refresh the firmware
1. Open the shortcut, and the software to run the interface as shown below. If the pop-up software updates window, please close the small window.
2. First, shut down the tablet. If you are unsure whether it off state, long press the power button for 10-20 seconds to force shutdown.
3. Press home key and plug in the USB cable, and then continuously press the power button 5-10 times, until the lower-right corner of the computer prompts discovery of new hardware and pop-up the window of installation driver, then release the home key.
6. After driver installation, will pop-up the window, as shown below:
The upgrade is complete. Turn off the upgrade tool, disconnect the USB cable.
Turn on the tablet. the first boot will be a little longer after upgrade, please be patient to wait for a moment.